Monday, July 25, 2016

P10 LED MATRIX BOARD DISPLAY

Here in this project I have used 12 P10 led matrix board in array of 4 horizontal and 3 vertical ie 4 columns and 3 row.
All displays are cascaded ,while last one become the origin or 0,0.

You need a long flat cable of 16 pin connector for connecting the display on different line as suggested in the figure.
I have used the DMD library by freetronics.
First I have planned to display time temperature one the first line, display two messages scrolling in line two and three.
I have used LM35 as temperature sensor which gives 10mV per degree change in celsius scale and used 1.1V as ADC reference for maximum resolution. 
DS1307 as RTC with IIC interface, but the problem is whenever is use DMD with IIC, I dont know why the time value of RTC is not stable its always changing like it gives right time for 3 or 5 times and then 165 165 and 85. May be due to some conflict on resources couldnt really figure out.
Solve this problem using two controller using one as just display drivers and second sending all data of temperature, time, font, writing message , reading message and saving message and controlling the speed of the message scroll.
Here's the link to the code final code https://github.com/kieran-shrestha/led_notice_board

2 comments:

  1. Please refer to this post for pt.h
    https://shortedwire.blogspot.kr/2014/09/multi-threading-in-arduino-18.html

    ReplyDelete